4000 Psi Concrete Cost Per Yard

Homeowners typically pay a per-yard price for 4000 psi concrete that reflects mix design, delivery distance, and placement requirements. The cost can vary based on region, aggregate options, and additives. The following sections break down typical costs and price drivers for this common strength concrete.

Item Low Average High Notes
Concrete (per cubic yard) $140 $165 $210 Includes ready-mix with 4000 psi strength
Delivery (fuel surcharge) $20 $40 $90 Distance dependent
Labor (placement, finishing) $0 $0 $20 Labor included in some contracts
Materials & Additives $5 $15 $35 Admixtures, fiber, cure & seal
Permit/Inspection $0 $50 $200 Depends on local rules
Delivery/Disposal Fees $0 $15 $60 Site clean-up included

Overview Of Costs

Cost for 4000 psi concrete per yard typically ranges from about $140 to $210 for the material, with total project costs often higher due to delivery, labor, and site work. Per-yard pricing is affected by mix design, additives, and transportation. The Assumptions: region, specs, labor hours.

Cost Breakdown

Major cost components typically include the concrete itself, delivery, placement labor, and any finishing, curing, and edge/finishing work. The table below shows how costs can stack up in a typical residential slab pour.

Materials Labor Equipment Permits Delivery/Disposal Warranty Contingency
$140-$210/yd $0-$60/yd $10-$25/yd $0-$50 $20-$90 $0-$20 $0-$20

data-formula=”labor_hours × hourly_rate”> Note: Labor time for a typical slab is often 4–8 hours depending on thickness, slope, and finishing requirements.

What Drives Price

Key variables include the concrete mix design (standard vs. high-flow or reinforced with fiber), the exact PSI target (4000 psi, w/ or w/o air entrainment), and the project scope (slab size, thickness, and access). Regional freight costs and minimum delivery charges significantly impact final pricing. For thicker slabs or long runs, expect higher per-yard costs due to additional material and reinforcement needs.

Ways To Save

Saving strategies include scheduling deliveries in off-peak weather windows, batching multiple projects with the same supplier, and selecting standard 4000 psi mix without specialty additives. Ask for bundled pricing that includes curb, forms, and initial finishing to avoid separate markups.

Regional Price Differences

Prices vary by geography. In the Northeast, labor and delivery often push costs higher, while the Midwest may offer more competitive delivery charges. The West Coast can be affected by stricter environmental and permit requirements. Regional deltas can be roughly ±15% to 25% from national averages.

Labor, Hours & Rates

Placement time depends on slab size and finish complexity. Typical crew rates range from $60 to $110 per hour, with a standard pour requiring 4–8 labor hours for a medium-size slab. Assumptions: crew size, slab area, and weather.

Real-World Pricing Examples

Three scenario cards illustrate common outcomes for 4000 psi concrete projects.

  1. Basic — 10 yd³, standard gray mix, no fiber, on a level residential pad. Materials $1,400–$2,100; Delivery $150–$300; Labor $0–$150; Permits $0–$50; Total $1,550–$2,600.
  2. Mid-Range — 15 yd³, standard mix with fiber reinforcement, basic finishing, short driveway extension. Materials $2,100–$3,150; Delivery $250–$450; Labor $300–$750; Permits $0–$100; Total $2,650–$4,450.
  3. Premium — 20 yd³, 4000 psi with air entrainment, decorative finish, long run, better margins for formwork and curing. Materials $2,800–$4,000; Delivery $350–$600; Labor $700–$1,200; Permits $50–$200; Total $3,900–$6,000.

Assumptions: region, specs, labor hours.

Design Transition Studio Team

The Design Transition Studio team researches U.S. home-improvement costs, price ranges, and the practical factors that affect a homeowner’s final budget.


Continue planning