Prices for hanging interior doors vary by door type, size, and whether the door is prehung or a slab. The main cost drivers include materials, labor time, and hardware options. This article provides practical U.S. price ranges in USD to help budget accurately, with clear low–average–high estimates and real-world drivers. A quick snapshot of typical costs follows the introduction.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door Type (hollow core, solid core, slab) | $75 | $150 | $350 | Solid core or custom sizes raise costs. |
| Labor (hanging, trimming, adjusting) | $150 | $350 | $700 | Includes hinge alignment and shimming. |
| Hardware (hardware kits, hinges, knobs) | $25 | $60 | $150 | Premium hardware increases price. |
| Delivery & Disposal | $20 | $60 | $150 | Depends on contractor policy. |
| Total Project | $270 | $620 | $1,350 | Assumes standard interior door, prehung or slab with basic hardware. |
Typical Cost Range
Cost estimates for hanging an interior door depend on whether the door is prehung, the door material, and the complexity of the install. For a hollow-core door with standard 6’8″ height, the total price typically falls in the range of $270-$620, with high-end projects surpassing $1,000 when specialty hardware or custom sizes are involved. If the door is solid core or custom-sized, plan for higher labor and materials, often pushing totals toward the $600-$1,000 range or more. The per-unit cost helps planners budget scenarios such as one door at a time or multiple doors in a renovation. Assumptions: region, specs, labor hours.
Cost Breakdown
Understanding the components helps compare bids and spot where savings may occur. The table below shows typical categories and ranges for a single interior door install. A mini-formula note highlights labor cost framing.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $75 | $150 | $350 | Hollow-core doors are cheaper; solid-core and custom sizes cost more. |
| Labor | $150 | $350 | $700 | data-formula=”labor_hours × hourly_rate”> |
| Hardware | $25 | $60 | $150 | Includes hinges, latch, handle. |
| Delivery/Disposal | $20 | $60 | $150 | Depends on distance and packaging disposal needs. |
| Warranty & Overhead | $0 | $20 | $50 | Typically included in service charge. |
What Drives Price
Pricing is influenced by door type, size, and installation complexity. Key factors include whether the door is hollow-core or solid-core, whether the door is prehung (with frame) or a slab, and the seat of the door (standard 6’8″ height versus tall or French doors). Larger frames or unusual thicknesses raise both material and labor costs. The hardware selection, such as premium sets with decorative hinges, also nudges the total higher. The contractor’s travel time and accessibility of the install site can add to the bottom line.
Ways To Save
Small changes can cut overall costs without sacrificing function. Consider choosing a hollow-core door with standard dimensions, which lowers both material and labor time. If the existing frame is in good condition, opting for a slab door and mounting the existing hinges can reduce labor. Bundling multiple door installs in a single project often yields a discount on labor charges. If possible, select stock sizes and finishes available locally to minimize delivery fees and expedite installation.
Regional Price Differences
Prices vary by region due to labor markets and material costs. In the Northeast, expect a higher per-door labor rate driven by higher living costs, often $20-$40 more per hour than the Midwest. The West Coast can be similar, with premium hardware and fast-tracking increasing totals. The South tends to be more affordable, especially for hollow-core doors and standard hardware. A three-site comparison shows roughly ±15-25% differences between urban, suburban, and rural markets for the same door type and install assumptions.
Labor, Hours & Rates
Labor time is a major driver for interior door installs. A typical hollow-core door can take 1.5-3 hours for a standard prehung installation, depending on hinge count and existing frame alignment. Solid-core doors or custom frames may require 3-5 hours. Regional crew rates commonly range from $60-$120 per hour, with premium specialists charging more. Assumptions: single door, standard doorway, no structural work.
Real-World Pricing Examples
Three scenario cards illustrate common outcomes for a single interior door, helping compare bids and plan budgets.
- Basic — Hollow-core, prehung, standard 6’B door; labor 2 hours; materials $75; hardware $40; total around $280-$440.
- Mid-Range — Hollow-core or solid-core with standard hardware; labor 3-4 hours; materials $120-$180; hardware $60; total around $500-$750.
- Premium — Solid-core, custom size or tall door, premium hardware; labor 4-6 hours; materials $200-$350; hardware $120-$150; total around $900-$1,350.
Assumptions: region, specs, labor hours.
