Double sided indoor/outdoor fireplaces bring heat and ambiance to both sides of a space, but pricing can vary widely by size, materials, and installation specifics. This article outlines typical cost ranges and the main drivers behind a price quote for a dual‑faced unit, with practical figures for U.S. buyers seeking a clear cost picture.
Prices generally include unit purchase, installation, and basic venting considerations, with additional charges for finish work, permits, and electrical or gas line work. Cost drivers include the chosen fuel type, enclosure materials, minimum clearances, and whether the fireplace is vented, ventless, or requires special routing for an outdoor environment.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Double‑sided gas fireplace unit | $3,500 | $6,500 | $12,000 | Includes glass, framing, firebox, basic logs |
| Installation labor (gas line + venting) | $1,500 | $3,000 | $7,000 | Region-dependent |
| Finish carpentry and stone/tile work | $1,000 | $4,000 | $9,000 | Perimeter finishing |
| Permits and inspections | $200 | $800 | $2,000 | Local codes may vary |
| Electrical or gas connection upgrades | $300 | $1,200 | $4,000 | Power or gas line modifications |
Average Total Price for a Double Sided Indoor Outdoor Fireplace
Typical installed price ranges from about $7,000 to $16,000 for a mid‑sized, gas‑powered double sided unit with standard finish work. Expect higher costs for premium materials, larger dimensions, or complex outdoor routing. For a smaller 42‑inch model with conventional finishes, pricing tends toward the lower end; for a 60‑inch outdoor/indoor setup with custom stone cladding, costs push into the high end.
Key Cost Components in a Double Sided Unit Quote
The main price components fall into four to six lines on a formal quote. Materials and unit cost cover the fireplace itself; Labor accounts for installation, venting, and trim; Permits reflect local code requirements; and Delivery/Disposal covers removal of old equipment and bringing in new parts.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (firebox, framing, glass) | $2,000 | $4,000 | $8,000 | Quality varies by finish |
| Labor (installation, venting, connections) | $1,500 | $3,000 | $7,000 | Includes labor hours × hourly rate |
| Permits/inspections | $200 | $800 | $2,000 | Code‑driven |
| Delivery/Removal | $150 | $700 | $2,000 | Depends on distance |
| Finishing and surround work | $800 | $3,000 | $6,000 | Stone, tile, or mantels |
Assumptions: standard 42–60 inch units, Midwest to South regions, standard fuel type and venting, normal access.
Material and Installation Cost Drivers for 42‑Inch Models
Smaller, visually balanced double sided fireplaces around 42 inches often sit in the $5,000–$9,000 range for the unit alone, with installation pushing totals to $9,000–$14,000 depending on options. Material choices, such as finished stone versus ceramic surround, have a strong impact on price.
Regional Variations in Indoor Outdoor Fireplace Pricing
Prices reflect regional labor rates and permitting costs. In high‑cost markets (e.g., coastal West or major metro areas), installed pricing can move 15%–25% higher than national averages. In rural markets, you may see reductions of 5%–10%. For a midrange double sided unit, expect regional spreads of roughly $1,000–$4,000 on installed totals.
Labor Hours and Crew Size for Mounting a Double Sided Fireplace
Typical installation requires 1–2 skilled technicians over 1–3 days, depending on wall access and vent routing. Broken down, labor can run $1,500–$7,000 for labor alone, with higher estimates tied to custom finishes and outdoor enclosure work. If trenching for gas lines or trenching for vent pipes is needed, add time and cost accordingly.
Permits, Venting, and Safety Equipment Costs
Code compliance adds a predictable baseline: permits often run $200–$800, with inspections $150–$1,200. Outdoor units may require weatherproof clearances and exterior venting details that raise both material and labor costs. Venting systems, gas lines, and termination details contribute materially to the total price.
Ways to Reduce the Price Without Sacrificing Quality
Control scope by choosing a standard size and finish, schedule work in off‑peak seasons, and compare quotes for identical specifications. Bundling finish work with the fireplace project can save up to 10%–15% on total spend. Consider DIY finishing or using ready‑made surrounds to lower finish‑out costs while maintaining safety standards.
Comparison Among Fuel Types for Dual‑Sided Fireplaces
Gas facings are common for dual‑sided installations, but ethanol and electric options exist. Gas typically costs more upfront but offers real flame and heat; electric or ethanol units may save venting costs but deliver less heat. For dual surfaces, ensure the selected system is rated for indoor/outdoor use and meets local code requirements.