Washing Machine Control Board Repair Cost Guide

Prices for washing machine control board repair vary based on the board type, the machine model, and local labor rates. Typical costs are driven by the control board price, diagnostic time, and labor to replace or reprogram the board. This guide presents cost ranges in USD and practical pricing details to help buyers budget accurately.

Assumptions: region, board type (OEM or aftermarket), machine age, and labor hours.

Item	Low	Average	High	Notes
Control board price	$60	$120	$350	OEM boards tend to be higher; regional availability matters.
Diagnostic fee	$40	$70	$120	Often applied toward repair if approved.
Labor (replacement/reprogram)	$90	$180	$320	Times vary with model complexity and access.
Parts & supplies	$0	$20	$60	Conduit, connectors, anti-static items.
Delivery/ Disposal	$0	$15	$40	Local handling fees may apply.
Tax & overhead	$0	$20	$60	Regional tax differences apply.

Overview Of Costs

Typical total project ranges are $180-$650, with many repairs landing around the $300-$500 zone when a common control board is replaced and tested. When considering per-unit costs, expect board price to range from $60 to $350, not including labor. Assuming standard diagnostics and one repair attempt, the combined diagnostic and labor usually accounts for the majority of the budget.

Cost Breakdown

Category	Low	Average	High	Notes
Materials	$60	$120	$350	Board price varies by model and whether OEM or aftermarket.
Labor	$90	$180	$320	Includes removal, board swap, and basic reprogramming.
Diagnostics	$40	$70	$120	Often credited toward repair if approved.
Delivery/Disposal	$0	$15	$40	Courier or haul-away fees may apply in some areas.
Taxes	$0	$20	$60	State and local taxes vary by location.

What Drives Price

Board type and model complexity have a large impact on price. If the machine uses a rare or vendor-specific board, prices can be higher, and lead times longer. Labor rates by region also affect total cost; urban areas typically command higher hourly rates than rural markets.

Factors That Affect Price

Severe component failures or multiple faulty boards can require board replacement plus additional repairs to related modules. If the model requires reprogramming or dealer-specific software, the job may incur higher diagnostic and labor charges. Warranty coverage on boards can offset some costs if the repair is within the manufacturer’s terms.

Ways To Save

Shop for compatible aftermarket boards where available; they can be significantly cheaper than OEM replacements. Ask for diagnostic-only estimates to avoid paying for unnecessary repairs. Scheduling repairs during off-peak seasons may reduce hourly rates in some markets.

Regional Price Differences

Prices vary by location. A three-city comparison shows typical disparities in total project pricing due to labor, shipping, and tax. Urban centers usually carry the highest ranges, Suburban markets sit in the middle, and Rural areas tend to be the lowest.

Labor & Installation Time

Most control board replacements take 1–3 hours, depending on access and wiring harness complexity. Time estimates influence labor costs, and longer service calls raise the total price. A basic diagnostic plus replacement in a straightforward model may sit toward the lower end, while models with hard-to-reach boards push costs higher.

Additional & Hidden Costs

Some shops add fees for testing after replacement or programming updates. Hidden costs can include environmental disposal fees and surcharges for expedited service. If special tools or dealer software are required, expect extra charges. Assumptions: standard service area, typical model families, no extensive wiring repairs.

Real-World Pricing Examples

Three scenario cards illustrate common outcomes. Each includes a basic parts list, labor hours, per-unit prices, and a total.